ACR&Artex RCL-75 - Manual (Page 4)

Y1-03-0158 Rev. J 3
SECTION 1 - HOW THE SEARCHLIGHT WORKS
The RCL-75 was specially designed for mariners who require a high
intensity remote controlled searchlight that is compact, light weight and
can stand up to the tough marine environment.
The RCL-75 searchlight system contains an intense light beam that
produces 180,000 peak candlepower by combining two 55W halogen
lamps with unique optical quality, parabolic reflectors. All functions of
the searchlight can be electrically operated by remote control from the
pilot area of the vessel using the remote control Point Pad™ and
interconnecting cable supplied with the RCL-75.
The sleek, robust design and modern construction materials of the
searchlight body makes it attractive for recreational and commercial
vessels. The searchlight is made of a UV resistant ASA plastic to
minimize yellowing, and is gasketed and finished to repel the weather.
SECTION 2 - PREPARING TO INSTALL
Unpacking the RCL-75
Before proceeding with the installation of the RCL-75, please verify that
the content of the box includes the following:
QTY ITEM ACR PART NUMBER
1 Light assembly A3-06-2177
1 Deck mount A1-18-1724
1
17’ wire harness
9426
1
Remote control Point Pad™ and extra
cover for flush mounting
9428
4 S/S Allen bolts A1-05-0734-1
4 S/S nuts A1-05-0736
4 S/S flat washers A1-05-0741
4 S/S lock washers A1-05-0737
1 Special L wrench (Allen wrench and
Phillips head screwdriver) T1-04-0047
2
U clamps for remote control Point Pad™
flush mount
A1-17-1366
1 Mounting gasket A1-25-0132
1 Surface mount gasket A1-25-0135-1
1 Flush mount gasket A1-25-0135-2
1 Product Support Manual Y1-03-0158
1 Light base mount template* Y1-03-0158-1
1 Remote control panel template (flush)* Y1-03-0158-1
1 Remote control panel template (surface)* Y1-03-0158-1
*Templates are on a separate sheet in this box.