ACR&Artex ELT to Nav Interface Boeing - Manual (Page 39)

25-69-11
Page 39 of 58
JUL 28/11
ACR ELECTRONICS, INC / ARTEX PRODUCTS
ABBREVIATED COMPONENT MAINTENANCE MANUAL
-B (453-6501)
REMOVAL
TASK 25-69-11-050-801
1. ELT/NAV Interface -B
SUBTASK 25-69-11-050-001
A. Removal
(1) See "Figure 5. ELT/NAV Interface -B Removal".
(2) Disconnect ELT/NAV Interface -B plugs:
(a) P2, and
(b) P1, if installed.
(3) Install connector covers to protect the ELT/NAV Interface -B receptacles.
(4) Remove the screws attaching the ELT/NAV Interface -B to the mounting structure.
Figure 5. ELT/NAV Interface -B Removal
REMOVE SCREWS
(6 PLCS)
3
REMOVE P1, IF INSTALLED
REMOVE P2
ELT/NAV
INTERFACE
ELT (REF.)
1
2
NOTE: CABLES AND PLUGS
NOT SHOWN FOR CLARITY.
MOUNTING
STRUCTURE
(REF.)