ACR&Artex GlobalFix iPro - Manual (Page 19)

Y1-03-0233 Rev. J 18
CAUTION: Keep this beacon a safe distance away from all
magnetic sources. Magnet safe distance is 4.6ft. or 1.4m, including
the distance from stereo speakers.
3. Category I bracket
The SeaShelter
3
™ Category I bracket has five pre-drilled screw holes to
use for securing the bracket to a flat surface. Remove the SeaShelter
3
™
lid by turning the spring loaded knob on the lid 1/4 turn counterclockwise
and pull. The lid will lift away from the top of the base and disengage at
the bottom of the base. The lid is tethered to the base to help prevent
loss. Pull the beacon with steady pressure from the bracket. It is not
necessary to remove the HydroFix™ Hydrostatic Release Unit (HRU) to
mount the bracket using four of the holes. For extreme conditions a fifth
hole is available when the HydroFix is removed and the ejector spring is
deployed. The bracket can be held in place to mark the placement of the
screw holes or you can use the mounting template provided. The use of
#10 pan head stainless steel fasteners
(minimum of ½” long) and ½”
washers (not included) is recommended. Make sure that fasteners will
not contact any wires or plumbing before drilling pilot holes.