Acroprint ARES III - Manual (Page 16)

9. Once this procedure is effected you can proceed to install (mount) your recording stations.
How to add new data items; all iButtons at Once (recommended procedure for experienced users)
1. Select the Assignments Tab.
2. Read/Touch with your M4000 reader, all the iButtons you want to assign. At this point in time do not read / touch any of the Booklet iButtons.
3. Connect your M4000 reader to the appropriate free (not in use) Serial Comm., port.
4. Press “Download”.
5. All iButtons will be automatically assigned to this data folder (Tab).
6. With a click of your mouse choose one of the iButtons listed on the screen.
7. Select
the “Edit” button located at the button bar.
8. In the window “Name”, key in the Recording Station name, Watchman name, Supervisor name, Vehicle Registration Tag number or the name and/or
number of whatever person or element/site you want controlled.
9. In the window “Type”, select through the drop list arrow, the type (group) to which the iButton belongs. These types or groups can be: Recording
Station, Supervisor, Watchman, Vehicle, Etc.
Press the Add Type Button or Right click your mouse on top of the “Type” window to “EDIT/ADD addi-
tional types (groups or categories).
10. (Only for Recording Stations): In the window “Area”, select through the drop list (arrow), the Tour Area to where you want the station assigned.
Press the Add Area Button or Right click your mouse on top of the “Area” window to “EDIT/ADD additional Areas.
11. (Only for Recording Stations): In the Window RPH (Recordings per Hour) select the amount of times per hour you want this station visited.
12.
Once this procedure is effected you can proceed to install (mount) your recording stations.