Acroprint MasterSync Wireless Synchronized Clock Systems - Manual (Page 4)

Frequency Channel
The factory has preset your transmitter to the FCC assigned Frequency Channel. You can skip this step unless
a separate frequency sticker is attached to your transmitter, or directed by factory personnel.
If a frequency sticker is attached:
Push and hold the “MODE” button located on the front of the transmitter until “CHANNEL” appears.
Push the “SET” button located on the front of the transmitter until you find the Frequency Channel that has
been assigned by the FCC and provided to you.
Once the Channel is selected, push the Mode button to return to programming other features.
There are 10 available channels as follows:
“CH00” 467.2125 MHz
“CH01” 467.2375 MHz
“CH02” 467.2625 MHz
“CH03” 467.2875 MHz
“CH04” 467.3125 MHz
“CH05” 467.3375 MHz
“CH06” 467.3635 MHz
“CH07” 467.3875 MHz
“CH08” 467.4125 MHz
“CH09” 467.4375 MHz
Time Zone (UTC OFFSET)
The factory has preset the transmitter to your Time Zone. If you need to change, push and hold the “MODE”
button located on the front of the transmitter unit. “UTC OFFSET” will display. Push the “SET” button located
on the front of the transmitter unitil you find your time zone.
Once the “Time Zone” is selected, push the Mode button to return to programming other features.
North American Time Zones: There are 24 available time zones worldwide.
- 05: EASTERN
- 06: CENTRAL
- 07: MOUNTAIN
- 08: PACIFIC
- 09: ANCHORAGE
- 10: HONOLULA
MasterSync
product manual -4
TM