Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 24)

Bi-Weekly
1
Push the [FUNCTION] button for 2
seconds.
3
In the case of bi-weekly ending,
push the [+] or [-] button to set the
left-side number at "3" and then
push the [SET] button. At that
moment, flashing of the display will
change to the ending day.
4
Next, set the desired ending day,
which comes within two weeks
from today. The pay period ending
date is the number of days from the
date you are setting the clock.
Example: Assume that today is
Friday, July 16, 2004
and the ending day is
Sunday the week after
next. As illustrated in
the figure on the left,
ending day (Sunday) is
nine days after.
Push the [+] or [-] button to set the
right-side number of the display at
"9".
5
Push the [SET] button to finish the
setting. At that moment, the display
will change from flashing to steady,
and the setting is now completed.
Day of the week and time are
recorded on the card when you
set the bi-weekly ending.
6
Push the [SETTING START/END]
button to get out of setting mode.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
2
Once a number on the display starts
flashing, make sure the " " mark is
located under the "PAY PERIOD"
mark.
A flashing number can be changed.
24
18
SET FUNCTION
AM
Date
Colon
PAY PERIOD
Ending day
SET FUNCTION
PAY PERIOD
SET FUNCTION
PAY PERIOD
Example
Today
July 16
Friday
···· ·· ·······
··············
··············
··············
····
Ending day
July 25······
Sunday
July 17
Saturday
July 20
Saturday
1 0 8 9
1 Monthly
2 Weekly
3 Bi-Weekly
4 Semi-Monthly