Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 46)

46
40
AM
Colon
Date
4
Push the [+] or [-] button to set the
desired hours. In case of the
example, push the [+] button to set
the first one digit at "0" and push the
[SET] button.
At that moment, the flashing of the
display will change to the last two
digits. Then, push the [+] or [-]
button to set at "40" and push the
[SET] button. At that moment, the
display will change from flashing to
steady.
Range of values: 1- 168 hour(s)
(" " makes the function disabled.)
5
Push the [SETTING START/END]
button to get out of setting mode.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock. Or push the [SET]
button to advance to program #06,
Setting round & grace times.
SET
SCHEDULE
SET
SCHEDULE
Hour