ACS AET65 Smart Card Reader with Fingerprint Sensor - Manual (Page 9)

6.0. Power Supply
The AET65 requires a voltage of 5 V DC, 100 mA regulated power supply. The AET65 Smart Card
Reader gets power supply from a PC (through the cable supplied along with each type of reader).
6.1. Status LED
The Green LED around the card slot indicates the activation status of the smart card interface:
 ON
Indicates that the power supply to the smart card is switched on, i.e., the smart card is
activated.
 OFF
Indicates that the power supply to the smart card is switched off, i.e. the smart card has not
been inserted, or the smart card has not been powered up (if it is inserted)
Document Title Here Document Title Here
Document Title Here
AET65 Reference Manual
Version 1.00
Page 9 of 19
[email protected]
www.acs.com.hk