Activeforever Forward Mobility Voyager Scooter User Manual
Voyager seated scooter, Quick start user guide, For your safety
Step 8
Final Check before every use:
1. Check all Wheel Axle Bolts for proper tightness.
2. Check Handlebar Mast Locking Clamp and Seat Height Locking
Clamps are securely in the locked position. Please review Step 4
and Step 6.
3. Check Handlebar Post Hinge and Seat Post Hinge to make sure
they are securely locked. Please review Step 3 and Step 5.
4. Check for damage to any of the Voyager Seated Scooter®
components before every use.
5. You may regularly clean the Voyager Seated Scooter® with mild
soap, warm water and a non-abrasive sponge. Please make sure all
four rubber grips are free from any substances that may cause your
hand or foot to slip.
6. Inspect the Brake Lever and Brake Pad to make sure they
function properly. Please review Step 7.
Voyager Seated
Scooter®
Quick Start User Guide
Thank you for ordering the Voyager Seated Scooter®. When
properly used, the Voyager Seated Scooter® will provide an
innovative way to meet your off-loading needs indicated by your
physician or health care professional. We recommend informing
your health care provider you are using this medical device.
Please be advised this device is not recommended for anyone
under 18 years of age
and not intended for any use as a toy or
recreational device.
For Your Safety
Please read this Quick Start User Guide before using the
Voyager Seated Scooter®. It contains important safety and
operating instructions. We strongly recommend viewing the
Detailed User Guide on our website for
full maintenance and warranty information. Please be advised
failure to read this guide may result in user injury, damage to
the device and loss of warranty protection.
©2008-2009 FwdMobility All Rights Reserved
Make sure all four Wheel Axle
Bolts are tight. Use the
included 6MM Hex Tool to
check tightness.