Activeforever PAL 1000 Portable Aquatic Pool Lift - Manual (Page 15)

TRANSFERRING
(For PAL and Splash! units):
Once the unit is positioned for use, use the following procedure to transfer to
the seat and into the water for desired aquatic activity:
• Rotate the seat to either side of the lift that is the most comfortable
position for transfer. The unit can be rotated to allow plenty of room for
those who may assist with the transfer.
• Raise or lower the seat to proper transfer height.
• Transfer onto the seat, insuring that the user’s weight is centered on the
seat. If the user is in a wheelchair, keep the wheelchair close by for easy
retrieval.
• Attach seat belt or stability vest, if needed.
• Raise the seat so there is ample legroom for travel.
• Rotate seat to the 12:00 position, over the water.
• Lower the seat into the pool. The hand control is submersible, so leave it
connected to the seat while swimming.
• When finished in the pool, return to the seat, insuring that the user’s
weight is centered on the seat.
• Re-Attach seat belt or stability vest, if needed.
• Raise the seat high enough so there is ample legroom for travel.
• Rotate the seat to the original transfer position.
• Raise or lower the seat to proper transfer height.
• Remove seat belt or vest.
• Transfer off of the seat.
14
Splash!
Transferring Diagram