Remrest care – Activeforever RemRest 901 CPAP Machine User Manual

Page 5

Advertising
background image

REMREST CLEANING

To clean the RemRest device, turn OFF the

unit and unplug it from the power source.

Using a damp cloth, wipe the unit clean

making sure no liquids enter the device

itself. Allow the unit to completely dry prior

to using.

REMREST INLET FILTER

The RemRest filter is located on the back of

the device and is reusable. To make sure

your device continues to provide optimum

performance, check your filter weekly and

clean the filter once per month (or sooner

if dirty).

To clean the filter, remove the filter from

the unit and wash it in warm water until

the water runs clear. Allow the filter to

completely air dry. Once the filter is dry,

return it to its housing.

SYSTEM SERVICE

Do not attempt to open or remove the

outer covers of the CPAP as there are no

user-serviceable internal components. Do

not attempt to repair this unit on your own

as this may cause further damage and will

void the warranty. If service is required,

have your care provider return this device

to an authorized

evo

service center.

RemRest Care

WARNING
Make sure to unplug the
device from the wall outlet
or DC power source before
cleaning as failure to do so
may cause electric shock.

CAUTION
Never place or submerge
this unit under water or
place near a water source of
any kind. Do not allow liq-
uids to enter into this
device. Doing so may result
in device damage.

CAUTION
Do not clean RemRest
device with alcohol or
alcohol based products.

NOTE
There is no other express
warranty. Implied
warranties, including those
of merchantability and
fitness for a particular
purpose, are limited to the
duration of the express
limited warranty and to the
extent permitted by law
and all implied
warranties are excluded.
This warranty does not
cover providing a loaner
device, compensating for
costs incurred for device
rental, or labor costs
incurred in repairing or
replacing defective part(s).

RemRest 5

Advertising