Activeforever Invacare Tracer Transport Wheelchair - Manual (Page 18)

SECTION 3—SAFETY INSPECTION
Transport Chairs 18 Part No.1125095
SECTION 3—SAFETY INSPECTION
NOTE: Every six months take your transport chair to a qualified technician for a thorough
inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth
operation of your transport chair. To operate properly and safely, your transport chair must be
cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your
transport chair.
Safety Inspection Checklists
Initial adjustments should be made to suit your personal body structure and
preference. Thereafter follow these maintenance procedures:
Inspect/Adjust Initially
❑ Ensure transport chair rolls straight (no excessive drag or pull to one side).
❑ Inspect seat and back upholstery for rips or sagging.
❑ Inspect back cane hand grips for wear, looseness, and/or deterioration.
❑ Inspect for any loose or broken hardware on the transport chair.
❑ Ensure that there is no excessive side movement or binding when the rear wheels are
lifted and spun.
❑ Inspect for cracked, broken or loose spokes.
❑ Ensure the wheel/fork assembly has proper tension when the caster is spun. The caster
should come to a gradual stop.
❑ Loosen/tighten the locknut if the wheel wobbles noticeably or binds to a stop.
❑ Ensure the wheel bearings are clean and free of moisture.
CAUTION
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
❑ Inspect the tires for flat spots and wear.
❑ Ensure the hand brakes DO NOT interfere with the tires when rolling.
❑ Ensure the hand brake pivot points are free of wear and looseness.
❑ Ensure the hand brakes are easy to engage.
❑ Clean upholstery and armrests.