Activeforever AXS Semi Portable Aquatic Pool Lift - Manual (Page 7)

7
Component Description- continued
Support Arm: Provides stability for the seat arm. Fabricated from an aluminum
extrusion, the seat arm nests inside the actuator arm to provide a unified look and
avoid pinch points. The support arm is treated with a durable powder coated finish
Seat Arm: Provides an attachment point for the seat assembly. Fabricated from an
aluminum extrusion and treated with a durable powder coated finish.
Housing: Two piece housing covers the turning components and gears. Fabricated
from ABS plastic with an acrylic cap to minimize discoloration due to extended
exposure to the sun and pool chemicals. The attractive finish of the housing is
suceptible to scratching. When cleaning the housing, be sure to use a clean, soft,
non-abrasive material.
Actuator: Provides the up and down lifting action.
Turning Motor: This 24v gear motor provides the turning action on Basic models.
Control Box: Forms the bottom of the control console; this unit controls the
mechanical operations of the lift. Three cables connect to the bottom of the
Control Box. The largest receptacle is the connection for the hand control. The
receptacle next to the hand control connector is marked number 1 and is used to
connect the Actuator cable. The next receptacle is marked number 2 and is used
to connect the cable for the Turning Motor.
Battery: The removable Battery is located on top of the Control Box. Please
carefully read the information on Battery charging and the warranty information
relating to the Battery.
Battery Charger: The Charger connects to the charging slot
on the bottom of the Battery where it connects to the Control
Box. Please carefully read the information on Battery charging
and the warranty information relating to the Battery.