Step 7 – Activeforever Teeter Hang Ups EP-550 Inversion Table User Manual
Page 11
Advertising
Attach the Tether Strap (F5-1007) to Limit the Degree of Rotation
•
Hook the clip at the end of the tether strap to the loop at the base of the table bed (Figure 13) to limit your
degree of rotation.
•
Tighten or loosen the strap to restrict or extend your angle of rotation.
Attach the Head Pillow
•
Attach the Head Pillow by securing the Velcro straps through the holes in the Table Bed – the position of the
pillow can be adjusted depending on the user (Figure 14).
Step 7
Figure 13
Figure 14
Advertising