Activeforever Verseo ePen Permanent Hair Removal System User Manual

Page 11

Advertising
background image

NB: If skin becomes pink during first treatment, this is quite normal and will disappear

after 30 minutes. repeat the treatment the following day. Successful treatment is

cumulative - the more you use the product, the better the results. DO NOT, however

exceed the maximum recommended use.

F a c i a l U p p e r L

I P

(

FACE PAD

Mode)

Thoroughly clean treatment area as before.

Slide switch mode to

OFF

position.

Insert lead into jack socket at

the end of

e

-PEN.

Carefully apply upper lip pad

so that it adheres to the skin.

Place the second circular pad on

either upper arm.

Carefully push the white lead clip onto

the button on the upper lip pad.

Carefully push the green lead cap onto the circular pad.

Slide the pad button to the

FACE PAD

position.

The red power light illuminates to show power on. The green

conductivity light illuminates to show good conductivity.

One beep sounds, the first stage of 5 minute treatment begins.

After 2.5 minutes the green LED light will flash to indicate 1 minute rest period.

After 1 minute, the green LED light remains on and one beep sounds to

indicate 2nd stage of treatment (2.5 minutes).

Three beeps will sound to indicate end of treatment and green LED light will go out.

Slide mode switch to

OFF

.

Remove hairs with

e

-PEN tweezers or if you prefer

your own tweezers.

Carefully replace conductive pads onto the silicon backing sheet,

in order to preserve self-adhesive for next treatment.

Maximum Use: DO NOT EXCEED one treatment per day in one treatment area using

face pad. Maximum of 3 treatments per week in one treatment area.

1 0

PROBE

OFF

FACE PAD

BODY PAD

PROBE

OFF

FACE PAD

BODY PAD

PROBE

OFF

FACE PAD

BODY PAD

T

I P

:

Slight tingling sensation? This can be

reduced with thorough cleansing of treatment area.

ePEN_Instruction6_04 6/16/04 1:55 PM Page 11

www.ActiveForever.com

Advertising