Actron CP9449 ABS BrakeScan - Manual (Page 11)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1 – 7
Safety Precautions
!
Risk of equipment or circuit damage.
• Unless specifically directed by manufacturer, make
sure ignition is off before connecting or disconnect-
ing connectors or any vehicle electrical terminals.
• Do not create a short between battery terminals with a
jumper wire or tools.
Improper equipment use can cause equipment or circuit dam-
age.
Misdiagnosis may lead to incorrect or improper repair and/or
adjustment.
• Do not rely on erratic, questionable, or obviously erro-
neous test information or results.
- If test information or results are erratic, question-
able, or obviously erroneous, make sure all con-
nections and data entry information are correct
and test procedures were performed correctly.
- If test information or results are still suspicious, do
not use them for diagnosis.
Improper repair and/or adjustment may cause vehicle or
equipment damage or unsafe operation.
Some vehicles are equipped with air bags.
• Follow service manual warnings when working around
air bag components or wiring.
- If service manual instructions are not followed, an air
bag may deploy unexpectedly, resulting in injury.
- Note an air bag can still deploy several minutes after
ignition key is off (or even if vehicle battery is discon-
nected) because of a special energy reserve module.
An air bag opening can cause injury.
! CAUTION
! CAUTION
! DANGER