Actron CP9449 ABS BrakeScan - Manual (Page 19)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 3
3
Using the Tool
Display
The display has a large viewing area for posting messages, instructions, and
diagnostic information.
✓
The back-lit liquid crystal display (LCD) is a 128 x 64 pixel display.
❒
The following symbols may appear on the display. The chart below
describes what each symbol means:
 Indicates that additional information is available on the previous
screen. Press the
UP arrow key to view the data.
 Indicates that additional information is available on the next screen.
Press the
DOWN arrow key to view the data.
Z Indicates that the internal battery needs replacing or is not installed.
Replace or install the internal battery.
Indicates that the
USER key is active. Press the USER key to
read codes.
Keypad
The keypad is used to move through the different menus of the Tool. The Tool’s
software is designed for easy operation with an intuitive navigation system.
Do not use solvents such as alcohol to clean the keypad
or display. Use a mild nonabrasive detergent and a soft
cotton cloth.
Do not soak the keypad in water because the water
might find its way inside the Tool.
C0023
Left Front Whe el 
Spe ed Sensor Circuit
Malfunction
      
Current MIL Code
1 of 3
ABS
Z
! CAUTION
! CAUTION