Setting unit preferences, Basic functions – AcuRite 01035 Weather Station User Manual

Page 8

Advertising
background image

WEATHER SELECT:

The “Weather Select” area of the display features heat index, dew

point, wind chill calculations, as well as indoor temperature and

humidity. Rainfall rate (inches per hour) can also be viewed in the

weather select area. To change the “Weather Select” category,

press the selection arrow button just to the left of the weather select

display area.

WIRELESS SIGNAL RECEPTION ICON:

The display console features a “SENSOR” signal reception icon to the

left of the clock display area. If there are a low number of “bars”

present, you may experience no temperature display ( “--” ) or

inaccuracy. Occasionally, due to intermittent physical obstructions (such

as vehicle traffic, etc.) or other environmental interference, the signal

may be lost. If the sensor batteries are low the signal will be lost as well.

After a signal loss- the display console will automatically begin to search

for the wireless multi-sensor and attempt to re-acquire the wireless signal.

In the event that the signal is lost completely and cannot be re-acquired,

the weather ticker will display “SENSOR SIGNAL LOST- CHECK BATTERIES

AND PLACEMENT”. See “troubleshooting” for more information.

1. Press the “ ” button to adjust the unit preference

2. Press the up or down buttons to select either “STAND” for standard

or “METRIC” for metric units.

3. Press the “ ” button to confirm your desired selection

4. You will now see “WIND MPH”, press the up or down buttons to

select either MPH, KPH, or KNOTS for wind speed unit of

measurement.

5. Press the “ ” button again to confirm your desired selection

and exit “SET UNITS?” menu.

Setting Unit preferences

SETUP

Basic Functions

USE

CHANGING UNITS

The Professional Wireless Weather Center comes pre-set from the

factory in standard units ( mph, ºF, etc.). You may wish to change to

metric units ( kph, ºC, etc.).

To change the units, you need to first select “SET UNITS?” in the

center display area by pressing the up or down buttons.

The Professional Wireless Weather Center was designed to give you

the most often used information at a glance. The following is an

overview of basic functions for everyday use.

press the selection arrow to

change the weather select display

13

12

= Heat Index

= Dew Point

= Wind Chill

= Indoor Conditions

= Rainfall Rate (in./hr)

Advertising