Acumen AiM 108CH - Manual (Page 13)

- 13 -
To change recording configuration, please follow the following selections.
Chapter 2-1. Schedule Recording Settings
AIM Software HD 2.6
can schedule recording based on “Always”, “No Record”, and
“Motion recording for a particular hour.
To enable recording for a particular hour, please click on the week control and set the recording
option for the hour. Please also specify the recording type by selecting one of the recording
types.
To enable recording schedule for all hours, please click on Apply button for “Apply All Schedule”.
To apply the recording settings
for all cameras, please click on Apply button for “Apply Schedule
to All Channels”
Chapter 2-2. Motion Detection Recording
To enable motion detection recording, please click on camera “Property” button to
enable “Camera Settings” dialog box. Once the IP camera is configured properly,
please click on “Video” button to test the video streaming.