Acura Embedded AcuTab-M - Manual (Page 8)

4. Insert FFC cable of GPS module into connector slot. Screw to secure the GPS module
onto the tablet.
GPS Module
5. Under Windows, press the RF Button, and enable GPS module from the pops-up
screen’s option list.
Bios Setup Program
This system comes with a chip from Phoenix BIOS that contains the ROM Setup information for
your system. (This chip serves as an interface between the processor and the rest of the system
components.) This section explains the information contained in the Setup program and tells you
how to modify the settings according to your system configuration.
The Setup utility program allows updates to the main board configuration settings. The BIOS
setup values will be saved in the CMOS. It is executed when you change the system
configuration, you change the system backup battery, or the system detects a configuration error
and asks you to run the Setup program. You must have connected a USB type of keyboard, and
Use the arrow keys to select, and press Enter to run the selected program.
Function Key
Please check the following table for the function description of each direction key.
Function Key (s) Function Description
Moves cursor left to select Screens
/ Moves cursor up or down to select items
+ / - To change option for the selected items
<Tab> To bring up the selected screen
<F1> To display the General Help screen
<F10> To save changes and exit the BIOS SETUP UTILITY
<ESC> To jump to the Exit Screen or exit the current screen
Main Screen Setup Utility
When you enter the BIOS SETUP UTILITY, the Main screen will appear and display the
system overview.
The Standard CMOS Setup screen is displayed above. Each feature may have one or more
option settings. Use the arrow keys to highlight the feature you want to change and then use
“ ” or “ ” to select the value you want for that feature.
NOTE: The system BIOS automatically detects Phoenix, Processor, memory size,
thus no changes are necessary.
14 15