Acura Embedded AcuBrite 21″-Nav - Manual (Page 12)

AcuBrite 21-Nav Manual
7.Select the appropriate folder where set-up files will be installed. Then Press [Next >]
to continue installation.
8.Then type in the name of program folder for TouchKit or press [Next >] to continue. There will be a default
name for it.
During driver installation, the setup program will scan COM port for RS232 Touchkit controller. Once the
controller was scanned, the setup program will display a dialog as
Click Yes to add the controller on the specified COM port automatically.
9.Windows is copying files to disk and the setup is complete. It will request re-boot computer. Press [Yes >]
to re-boot immediately or [No >] to re-boot later. The installation will not be finished until system re-boot.
10. Setup is complete. After TouchKit installation, the USB device will be found automatically as soon as it was plugged
into the computer. Then users can see the new device on the application program window. And, the program will remove
the USB Device automatically as soon as it was unplugged. ( USB device is not supported for Windows95 )
Page 11