Acura Embedded AcuBrite 21″-Nav User Manual
Page 18
AcuBrite 21-Nav Manual
There are five modes in shutdown utility for user convenience.
[Standby] to enter standby mode that saves power consumption.
[Shutdown] to turn off PC.
[Reboot] to restart PC.
[Cancel] to escape from the Shutdown utility dialog.
[Exit] to disable the Shutdown utility.
Please notice that Windows NT does not support this function.
<Mouse Mode>
There are three kinds of mouse mode users could choose,
[Normal Mode]
It provides all the mouse functions, including the dragging function.
[Click on Touch]
Click action is executed as soon as users touch the panel.
[Click on Release]
Click action will not be executed until finger leaves the panel.
<Option>
Touchkit provides an option for advanced Mouse Emulation setting. When the Option button is pressed, a
setting property sheet will be popped up. Support Constant Touch and Support Auto Right Button check
boxes are shown in the property sheet to enable / disable Constant touch and Auto right button support.
[Constant Touch]
Enable Constant Touch to force driver to stop reporting touch point when the movement is within the range
which users can adjust. Therefore, the user can see a stabilized cursor instead of a chattering cursor when
users touch the same point with unwanted noise.
[Auto Right Button]
Enable Auto Right Button to force driver to report a right click mouse event to OS when users do a
continuing touch till time out. It no longer needs to touch the right button in the Touch tray to activate a
right click. This feature makes users to do right click more easily with touch screen.
<Cursor Visibility>
Cursor visibility function provides users to hide the cursor in the display. Please go to Start / Control Panel /
Mouse / Pointers / Scheme , and choose TouchKit Hide Cursor. Press [Apply] to make setting change,
and press [OK] to escape the property page.
Page 17