Acura 2010 ZDX - Manual (Page 212)

Light Control Buttons
Your vehicle has the light control
buttons on the front ceiling. With
these buttons, you can select three
positions: OFF, DOOR (door
activated position), and ON.
To select a position, press the
appropriate button.
When you press the DOOR button,
the indicator in the button comes on
as a reminder.
To turn off the setting, press the OFF
button.
OFF position:
●
The front individual map lights can
be turned on and off by pressing
each map light button (
).
●
The rear individual map lights
cannot be turned on.
Door (door activated) position:
●
The individual map lights in the
front and rear come on when any
door or the tailgate is opened,
when the remote transmitter/
remote (on models with keyless
access system) is used to unlock
the doors (see page
157 ). When
the doors and the tailgate are
closed, each light can be turned on
and off by pushing the map light
button (
).
After all doors and the tailgate are
closed tightly, the lights dim slightly,
then fade out in about 30 seconds.
To change the ‘‘INTERIOR LIGHT
DIMMING TIME ’’ setting, see page
124 .
With any door or the tailgate left
open, the lights stay on about 15
minutes, then go out.
On models without keyless access
system
The lights also come on when the
key is removed from the ignition
switch.
On models with keyless access
system
The lights also come on when the
power mode is set to VEHICLE OFF
(LOCK).
ON position:
● All the individual map lights come
on and stay on.
DOOR ACTIVATED POSITION
ON
OFF
Interior Lights
208
2010 ZDX