Acura 2010 ZDX - Manual (Page 548)

The component parts in the engine
compartment are protected by
several covers. You may need to
remove the cover when you perform
some simple maintenance work.
To remove the covers:
1. Remove the right and left engine
compartment covers by pulling
them straight up.
2. Remove the holding clips with a
flat-tip screwdriver and pull the
front bulkhead cover straight up.
When removing the cover, make
sure to move the cover slightly to
the left so that the hood latch
handle does not get in the way.
FRONT BULKHEAD COVER
ENGINE COMPARTMENT COVERS
HOLDING CLIP
Engine Compartment Cover
544
2010 ZDX