Acura 2012 TL - Manual (Page 202)

To insert the keyless access remote:
On all models
On automatic transmission models
On manual transmission models
When you open the driver’s door,
and each time you press the engine
start/stop button, you will see the
‘‘INSERT KEYLESS REMOTE
INTO SLOT’’ message on the multi-
information display in the following
situations:
When the keyless access system
main switch (see page
) is off.
The multi-information display shows
the ‘‘ACCESSORY MODE’’ or ‘‘TO
UNLOCK KEYLESS REMOTE
TURN OFF POWER’’ message to
remind you to change the power
mode to VEHICLE OFF (LOCK).
The multi-information display shows
the ‘‘ACCESSORY MODE’’ message
to remind you that the power mode
is in ACCESSORY.
To avoid damaging the slot, do not
insert any other objects into the slot
or put a sticker on the keyless access
remote.
Inserting the remote does not charge
the remote battery. If necessary, you
should replace the battery as soon
When the keyless access remote
system main switch in the glove box
is set to ON, the remote remains
unlocked when you insert it into the
keyless access remote slot and the
power mode is turned on.
195
Keyless Access System
Operation Guidance Unlocked Keyless Access Remote
198
11/01/14 18:28:45 31TK4630_203
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
When the keyless access remote
is not in the vehicle.
as possible.
2012 TL