Acura 2012 TL - Manual (Page 562)

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
Remove the bulb by pulling it
straight out of its socket.
Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Push the under cover in place and
set the inner fender cover in the
original position. Install the bolts
and tighten them securely. Insert
each holding clip, and lock it by
pushing on its center.
5.
6.
7.
8.
1.
9.
10.
Replacing a Front Turn
Signal/Parking Light Bulb
Lights
558
SOCKET BULB
11/01/14 19:31:47 31TK4630_563
Ma
int
e
na
nce
2012 TL