System setup, Multi-view rear camera – Acura 2011 ZDX Navigation User Manual

Page 126

Advertising
background image

Navigation System

125

System Setup

Multi-view Rear Camera

Your vehicle is equipped with a Multi-

view rear camera as shown in the

illustration.

When you shift to R (Reverse) with the

ignition switch in the ON (II) position,

the rear view is shown on the navigation

screen. Parking guide lines appear in the

rear view. For the best image, always

keep the camera lens clean, and be sure

it is not covered.

Since the camera display area is limited,

you should always back up slowly and

carefully, and look behind you for

obstacles.

Visible Range of the Rearview
Image

The rearview image is displayed within

approximately three meters of the vehicle.

NOTE:
• The Multi-view rear camera has a

special lens that makes distances
appear different than they actually
are.

• The Multi-view rear camera display

has a limited range, and the size and
position of objects around the area
may appear different from reality.
Make sure to check the surrounding
area carefully.

Tip:
To turn the guide lines on or off, press
and hold the

CANCEL

button for three

seconds.

Multi-view
Rear Camera

Screen display

Actual space

Bumper

Guide lines

Approx. 3 m (9.8 ft)

Approx. 2 m (6.6 ft)

Approx. 1 m (3.3 ft)

Tailgate open
range

Approx. 1 m (3.3 ft)

Approx. 2 m (6.6 ft)

Approx. 3 m (9.8 ft)

Camera

Advertising
This manual is related to the following products: