Getting started – Acura 2011 ZDX Navigation User Manual

Page 19

Advertising
background image

18

Navigation System

Getting Started

System Start-up

When you turn the ignition to ON (II), it

takes about 10 seconds for the

navigation system to boot up.

The first screen to appear is the

navigation system globe

screen. The

screen then changes to the

Disclaimer

screen:

NOTE:
Driver information will display on the
upper right side of the screen. If there
are any unread messages, the Message
icon will display on the bottom left side
of the screen. See page 20.

System Language Selection

Move the

Interface Dial

to the right to

select

CHANGE LANGUAGE

. On the

Select a language

screen, you can

select the language to be used by the

entire system by choosing from the

language choices that are displayed.

After you have changed the language

settings, you will be returned to the

Disclaimer

screen.

Read this disclaimer carefully so you

understand it before continuing. Push in

on the

Interface Dial

to select

OK

, and

the

map

screen will appear on the

display. The “OK” cannot be activated

by voice.

If you do not push in on the

Interface

Dial

, the screen will go dark after 30

seconds. (You can also display the

Wallpaper

screen. See page 121.) To

return to the

Disclaimer

screen, press

any navigation or voice control button.

Advertising
This manual is related to the following products: