Acura 2011 TL Navigation - Manual (Page 114)

System Setup
Navigation System 113
4. Rotate the Interface Dial knob
so the vehicle position arrowhead is
pointing in the correct direction, and
push in on the
Interface Dial . The
display will return to the previous
screen.
NOTE:
If you continually have to do this, there
are either problems in the database
or GPS reception problems. See
Accessories Precautions on page 5 .
5. As you drive, the current road will
be displayed at the bottom of the
screen.
Color
From the SET UP screen ( Other ),
say or select Color and the following
screen appears:
Map Color
Allows you to choose the map color
from one of fi ve colors for the Day and
Night modes.
Press the CANCEL button to return to
the previous screen.
NOTE:
• Choose “White” (factory default is
Beige) as the Day color to obtain the
best daytime display contrast.
• Choose “Black” (factory default)
as the Night color to obtain the best
nighttime display contrast.