Acura 2014 RDX Navigation - Manual (Page 54)

53
 Routing & Guidance  Edit Avoid Area
Edit Avoid Area
H INFO button  Set up  Other  Routing & Guidance  Edit Avoid Area
Specify up to five areas to avoid (e.g., road construction, closures), if possible, when
the system calculates routes to your destination.
1. Rotate
i to select New Area or
an existing area to edit. Press
u.
2. Rotate
i to select Edit Name to
label the area to avoid. Press
u.
3. Enter a name or title. Move
r to
select OK.
4. Rotate
i to select Edit Area to
define the area to avoid. Press
u.
The following options are available (after an area is set):
• View Area Map: Displays the selected avoid area on the map.
• Delete: Deletes the selected avoid area.
1 Edit Avoid Area
The avoid areas are shared with Driver 1 and
Driver 2. For example, if Driver 1 specifies some
avoid areas, Driver 2 can also use them for
setting a route.
The maximum size of an “avoid area” is 1/2
square mile.
If your selected area contains a freeway, you are
asked “Do you want to avoid freeways?”
Answering “No” allows you to use a route
through an avoid area on a freeway without any
pop-up messages.
You can select areas to avoid, however you
cannot select roads or areas that you want the
system to use for routing.
You can enter up to 25 characters for the name.
Continued
QRG
2014 RDX
Sys
tem
S
e
tup