Binatone BS-8020 - Manual (Page 5)

5
ENGLISH
Try to evenly distribute the load on the tray of the scales.
During weighing do not lean over other objects.
Whilst standing on the scales, do not make quick movements, jumps
and kicks, it will cause incorrect operation of the scales or break-
age, especially those made of glass and plastic.
Only weigh within the limits, indicated on the box of the ap-
pliance.
Do not insert foreign objects in the open parts of the appliance.
Prevent the appliance from falling or other objects falling onto
the appliance. It can damage the appliance and affect the accu-
racy of measurement during weighing.
Do not use the scales or store them in places with high humidity or
where water could be spilled on them.
Store the appliance in the package, in a horizontal position.
Do not put foreign objects on the scales.
When cleaning the scales, do not use abrasive materials and
cleansers as these can damage the body and parts of the ap-
pliance.
DESCRIPTION OF PARTS OF
THE APPLIANCE
1. Tray
2. Digital liquid crystal display
3. Battery compartment
4. 1 lithium battery 3V type CR2032
5. Legs of the appliance
USE OF THE
APPLIANCE
1. Set the scales on a flat hard horizontal surface.
Do not set the scales on carpets or other soft
surfaces, since it will affect accuracy of mea-
surements.
2. To turn on the scales, press the tray (1) with
your foot for a short time and wait for set-
ting of «0.0» on the display (2).
The scales are ready for operation.
BEFORE THE FIRST USE
Before the first use of the appliance take off
all packing materials. Open the battery compart-
ment (3) and remove the insulation sheet to free
the contacts.