Binatone BS-8020 - Manual (Page 6)

6
Note : if you stand on the scales earlier, the indication
«Err» will appear. If this happens, start the
procedure again.
3. Stand on the scales, evenly distributing the weight on the tray (1),
and do not move. Wait till the appliance calculates the result.
4. Get off the tray, and the scales will turn off automatically.
Note : if after adjustment to zero on the display of the scales
(2) you did not put any load on the tray (1), the
scales will turn off automatically within
approximately six seconds.
5. If the measured weight exceeds the allowable load (150 kg), the
display will show the indication of excess of the allowable load
«Err».
6. If the display of the scales (2) shows the indication «LO», it means
that the battery needs to be replaced. Open the cover of the com-
partment (3) and carefully take it out. Put the new battery in the
appliance, observing polarity (see picture B).
CARE AND CLEANING
1. Wipe the appliance with a damp lint free cloth,
wiping it dry, so that there are no water marks
on the tray (1). Do prevent water getting in-
side the appliance. Do not use hard abrasive
materials and substances for cleaning.
2. Always keep the appliance in a horizontal
position in a dry, cool place. Do not store the
appliance in places with high humidity or temperature.
DISPOSAL
This appliance should be disposed of in accor-
dance with waste disposal regulations in your coun-
try and with the least damage to the environment.
Only ecologically safe materials are used in the
packaging of our products and the cardboard and
paper can be disposed of with normal paper waste.