Olympus FL-300R - Manual (Page 10)

12 EN
Wireless remote control fl ash photography Wireless remote control fl ash photography
1
Set the RC switch to A or B.
A and B are the group settings. Set the fl ash control mode, etc. to each groups and
control them wirelessly.
2
Set [ # RC Mode] to [On] in the menu of the camera to make the fl ash on the
camera ready to fi re.
3
Set the fl ash control mode , etc. in each of the groups A and B on the camera.
Flash intensity value
250 250 F5.6 0.0 0.0 P
38 38
A Mode
TTL
M
Off
+5.0
TTL +3.0
1/8
–
LO
1 Ch
Group
Select the fl ash
control mode and
adjust the fl ash
intensity individually.
For MANUAL, select
the fl ash intensity. •
Normal fl ash/Super FP fl ash
Super FP fl ash is not compliant. •
Communication light level
Set the communication light level to
[HI], [MID], or [LO]. •
Channel
Be sure to set the channel
to [1]. •
Flash
intensity Flash control
mode
•