Garmin GNC 420 - Manual (Page 71)

GNC 420(A) Pilot’s Guide and Reference 5-3
SECTION 5
FLIGHT PLANS
Deleting a waypoint from an existing flight
plan:
1) Press the FPL Key and turn the small right
knob to display the Flight Plan Catalog Page.
2) Press the small right knob to activate the
cursor.
3) Turn the large right knob to highlight the
desired flight plan and press the ENT Key.
4) Turn the large right knob to select the waypoint
to be deleted and press the CLR Key to display
a ‘remove waypoint’ confirmation window.
5) With ‘Yes’ highlighted, press the ENT Key to
remove the waypoint.
6) Once all changes have been made, press the
small right knob to return to the Flight Plan
Catalog Page.
A one-line user comment may be added to any flight
plan, which is displayed on the Flight Plan Catalog Page,
next to the flight plan’s number. By default, as the flight
plan is being created, the comment shows the first and last
waypoints in the flight plan.
Changing the comment line for an existing
flight plan:
1) From the Flight Plan Catalog Page, press the
small right knob to activate the cursor.
2) Turn the large right knob to highlight the
desired flight plan and press the ENT Key.
3) Turn the large right knob to select the
comment line at the top of the screen.
4) Use the small and large right knobs to enter
the new comment (Figure 5-8). Press the ENT
Key when finished.
Figure 5-8 Comment Line Selected
5) Once all changes have been made, press the
small right knob to return to the Flight Plan
Catalog Page.
190-00140-20 Rev. K