Garmin nuvi 680 - Manual (Page 37)

nüvi 680 Owner’s Manual 
U
SinG the
fM t
ranSMitter
U
SinG the
fM
t
ranSMitter
If an FM transmitter is available on your
nüvi, you can listen to your nüvi audio
on an FM stereo.
notE: When using the FM
transmitter function on the nüvi, any
phone calls that you place or receive
through the nüvi might be overheard
by adjacent vehicles through the FM
stereo.
L�istening to the nüvi on
an FM Stereo
1. On the Menu page, touch >
Audio Output > FM Transmitter >
OK .
2. Tune your stereo to an FM channel
that has a lot of static and has a low
FM frequency number.
3. Touch the button beneath Frequency
Adjust . Touch - and + to select the
same frequency to which your stereo
is tuned.
Frequency Selection Tips
For best results, select a frequency below
90.1 FM.
When searching for an appropriate FM
frequency on your FM stereo, look for
an unused frequency that has steady,
consistent static. If you hear slight noises
and sounds in the background of the
static, choose a different frequency.
As you travel, you might need to change
the frequency for the FM transmitter.
A frequency not used by a radio station
in your area might be used by a station
elsewhere.
Switching between the
nüvi and an FM Stereo
1. On the Menu page, touch >
Audio Output .
2. Touch an output mode, and touch
OK .
tiP: To switch the audio output
between the nüvi and an FM stereo,
quickly press the Power button
twice.