Garmin G1000 Quest Kodiak - Manual (Page 448)

190-00590-03 Rev. A Garmin G1000 Pilot’s Guide for the Quest KODIAK 100
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
436
APPENDIX A
Figure A-6 Sensor Comparator Window
Comparator
Window
REVERSIONARY SENSOR ANNUNCIATIONS
Reversionary sensor selection is annunciated in the Reversionary Sensor Window, as shown in Figure A-7.
These annunciations reflect reversionary sensors selected on one or both PFDs. Pressing the SENSOR Softkey
gives access to ADC1 , ADC2 , AHRS1 , and AHRS2 Softkeys. These softkeys allow manual switching of sensors. In
the case of certain types of sensor failures, the G1000 may make some sensor selections automatically. The GPS
sensor cannot be switched manually.
Reversionary Sensor
Window Text
Condition
BOTH ON ADC1 Both PFDs are displaying data from the number one Air Data Computer.
BOTH ON ADC2 Both PFDs are displaying data from the number two Air Data Computer.
BOTH ON AHRS1 Both PFDs are displaying data from the number one Attitude & Heading Reference System.
BOTH ON AHRS2 Both PFDs are displaying data from the number two Attitude & Heading Reference System.
BOTH ON GPS1 Both PFDs are displaying data from the number one GPS receiver.
BOTH ON GPS2 Both PFDs are displaying data from the number two GPS receiver.
USING ADC1 PFD2 is displaying data from the #1 Air Data Computer.
USING ADC2 PFD1 is displaying data from the #2 Air Data Computer.
USING AHRS1 PFD2 is displaying data from the #1 AHRS.
USING AHRS2 PFD1 is displaying data from the #2 AHRS.
USING GPS1 PFD2 is displaying data from the #1 GPS.
USING GPS2 PFD1 is displaying data from the #2 GPS.
Figure A-7 Reversionary Sensor Windows
Reversionary
Sensor
Window