Using fm traffic, Led blink codes, Fm t – Garmin nuvi 650 User Manual

Page 28

Advertising
background image



nüvi 600/650 Owner’s Manual

U

SinG

fM t

raffic

U

sinG

fM T

raffic

Use an optional FM TMC (Traffic

Message Channel) traffic receiver to

receive traffic information broadcast

over the FM Radio Data System. For

information about FM traffic receivers

and coverage areas, see

www.garmin

.com/traffic

.

NOTE: The FM traffic receiver and

nüvi must be in data range of an FM

station transmitting TMC data to

receive traffic information.

NOTE: Garmin is not responsible

for the accuracy of the traffic

information. The FM traffic receiver

simply receives signals from the

traffic service provider and shows

that information on your nüvi.

NOTE: You do not need to activate

the subscription included with your

FM traffic receiver (if it came with

one). Your nüvi receives traffic data

as soon as it acquires satellite signals

and receives traffic signals from the

traffic service provider.

NOTE: You can only access the

traffic information if the nüvi is

connected to an FM traffic receiver.

To power

connector on nüvi

cradle

To power outlet

in vehicle

Power

LED

Status

LED

NOTE: If your FM TMC traffic

receiver has an antenna with suction

cups on it, route the antenna on

your windshield vertically using the

suction cups.

LED Blink Codes

The green Power LED lights when

connected to external power. The Status

LED indicates the signal reception:

Yellow dot-dash flashes: determining

which country you are currently in.
Yellow solid: searching for signal.
Red solid: momentary sync loss.
Green solid: normal traffic data.



Advertising