Garmin nuvi 650 - Manual (Page 9)

nüvi 600/650 Owner’s Manual 
G
ettinG
S
tarted
Step 2: Configuring the
nüvi
To turn on your nüvi, press and hold the
Power button on the top of the unit.
Follow the on-screen instructions to
configure your nüvi.
Step 3: Acquiring
Satellites
1. Turn on the nüvi.
2. Flip up the GPS antenna on the back
of the nüvi, so that it is parallel to the
ground.
3. Go outdoors to an open area, away
from tall buildings and trees.
Acquiring satellite signals may take
a few minutes. When the nüvi has
acquired satellites, at least one of the
satellite signal strength bars in the upper-
left corner of the Menu page are green
. When it loses satellite signals, the
bars turn red or hollow . For more
information about GPS, see page 36 .
Step 4: Using the nüvi
A Touch to find a destination.
B Touch to view the map.
C Touch to open the Travel Kit to use
features like the media player and
world clock.
D Touch to adjust the nüvi’s settings.
E Touch to adjust the volume, screen
brightness, and screen lock.
F Touch to view traffic information
when an optional GTM FM TMC
Traffic Receiver is connected.
F
E
D
C
B
A