User waypoints – Garmin GPSMAP 3005C User Manual

Page 25

Advertising
background image

GPSMAP 3005C Owner’s Manual



b

AsIc

o

PerAtIon

>

r

evIewIng

And

e

dItIng

w

AyPoInts

To access the Points tab from the Main Menu:

1. Press and hold

ADJ/MENU to open the Main Menu.

2. Use the

ROCKER to highlight the Points tab, and highlight either the User

or

Proximity sub tab.

Sub tabs

User Waypoints

The User sub tab on the Points tab shows a master list of all waypoints currently

stored in memory. From the User sub tab, you can review, edit, rename, or delete

individual waypoints, or delete all user waypoints. The number of available and

used waypoints are shown at the bottom of the User sub tab. Stored waypoints are

arranged in alphanumeric order.

To scroll through and review the waypoint list:

1. Use the

ROCKER to highlight the Points tab on the Main Menu, and then

highlight the

User sub tab.

2. Press up or down on the

ROCKER to scroll through the list of waypoints;

press right or left on the

ROCKER to scroll by page.

3. Press

ENTER to review the highlighted waypoint on the Review Waypoint

Page.

4. Press the

Next soft key to return to the waypoint list. The next waypoint in

the list is automatically highlighted.

Deleting Waypoints

The following soft keys are available when you highlight a waypoint on the User

sub tab:

New Waypoint—creates a new waypoint.

Delete—deletes the selected waypoint from the list, and from any route in

which the waypoint was used.

Del by Smbl—deletes waypoints that use the same symbol.
Delete All—deletes all waypoints from the unit.

NOTE: When you delete a waypoint from the list, it cannot be recovered from

the unit. Save important waypoints to a data card, or write them down.

To delete a single waypoint from the User sub tab:

1. Use the

ROCKER to highlight the waypoint you want to delete, and then

press the

Delete Waypoint soft key. A confirmation message appears.

2. Highlight

OK, and press ENTER to delete the selected waypoint.

To delete waypoints by symbol:

1. On the

User sub tab, highlight the waypoint you want to delete.

2. Press the

Delete By Symbol soft key.

b

as

Ic

o

pera

tI

on

Advertising