Garmin StreetPilot 2730 User Manual
Page 54
Advertising
46
StreetPilot 2730 Owner’s Manual
A
PPENDIX
To
mount your StreetPilot 2730:
1. Align the power plug on the vehicle adapter
to the connector and slide the plug into the
connector until fully seated.
2. Slide the locking lever on the mounting base to
the left (unlocked).
3. Slide the bottom of the StreetPilot into the
mounting base until it clicks into place.
Locking lever
Release tab
4. Slide the base’s locking lever to the right
(locked).
5. Plug the power cable into an available 12-Volt
receptacle in your vehicle.
6. Route the cable so it does not interfere with
vehicle operation.
Advertising