Usb interface troubleshooting – Garmin StreetPilot 2730 User Manual

Page 60

Advertising
background image

52

StreetPilot 2730 Owner’s Manual

A

PPENDIX

USB Interface Troubleshooting

Problem/Question

Solution/Answer

How do I know my

StreetPilot is in USB

Mass Storage Mode?

When your StreetPilot is in USB Mass Storage Mode, a picture of a

StreetPilot connected to a computer is shown. Also, your computer should

show a new Removable Disk Drive listed in My Computer.

My computer never

senses that the

StreetPilot is connected.

1. Unplug the USB cable from your computer.
2. Load the USB drivers to your computer. See

page 21

.

3. Plug the USB cable into your computer. Select

USB Mass Storage

.

I cannot find any drives

named “GARMIN” in my

list of drives.

Try the solution listed above.
If you have several network drives mapped on your computer, Windows may

have trouble assigning drive letters to your StreetPilot drives. Follow the

steps on

page 53

to assign your drive letters.

A message saying

“Unsafe Removal of

Device” appears when I

unplug the USB cable.

When you are ready to disconnect your StreetPilot from your computer,

double-click the

Unplug or Eject

icon in your system tray. Select “USB

Mass Storage Device” and click

Stop

. Select the StreetPilot drives and click

OK

. You can disconnect your StreetPilot from your computer now.

Advertising