Garmin Geko 301 - Manual (Page 27)

15
The Status is located at the top of the page and displays the current elevation.
The Profi le Field is located in the center of the page and displays elevation plots.
The Data Field at the bottom of the page is user-selectable and displays a variety of
recorded or current data.
The Elevation Page Options Menu allows you to select the type of information and
how it is to be displayed. Page Options include: ‘PLOT OVER TIME/DISTANCE’, ‘ZOOM
TIME/DISTANCE’, ‘ZOOM ELEVATION’, ‘VIEW POINTS’, ‘RESET MAX ELEVATION’, and
‘RESET ELEV(ATION) DATA’.
You can customize the ‘VIEW’ option display using the ‘ZOOM RANGES’ option to
determine time, distance, and elevation parameters. Use the ‘RESET ELEV DATA’ option to
clear recorded data from the page and to begin recording new data.
PLOT OVER TIME/DISTANCE
These two measurement options (changes over a set period of time or changes over a set
distance) apply only to the Elevation Plot, while the Pressure Plot is measured by time and
pressure only. The Pressure Plot is only available as one of the user-selectable fi elds at the
bottom of the screen.
ZOOM RANGES
You can set the Zoom Ranges for elevation, distance, or time when you display the View
Elevation Plot. Ranges for vertical distance are: 200, 400, 600, 800, 1,000, 2,500 and 5,000 feet.
Ranges for horizontal distance are: 0.2, 0.5, 1, 5, 10, 15, and 25 miles. Ranges for time are: 2, 5,
10, 20 and 30 minutes, 1 and 2 hours. The range for Pressure Plot is fi xed at 6.8 millibars and
12 hours and can not zoom in or out.
Elevation Page
Options
Elevation Page Options
NOTE: Metric system displays different zoom ranges.
)
190-00297-02_0A.indd 15 5/19/2003, 4:20:18 PM