Garmin Geko 301 - Manual (Page 47)

35
3. Press the UP or DOWN Button to scroll through the selections and press the OK Button
when you have found the correct Time Zone.
4. Press the PAGE Button to return to the page of your choice.
Daylight Savings Time
Daylight savings time can be set to ‘Automatic’ (using the built-in almanac to automati-
cally change the clock settings when daylight savings goes into or out of effect). You can
choose ‘Yes’ to manually add daylight savings or ‘No’ to remain on standard time.
To change the daylight saving fi eld:
1. Press the PAGE Button and switch to the MENU Page. Press the UP or DOWN Button
to highlight ‘TIME’ and press the OK Button to display the TIME Page.
2. Press the UP or DOWN Button to highlight the ‘DAYLIGHT SAVING’ fi eld and press the
OK Button.
3. Press the UP or DOWN Button, highlight ‘AUTO’, ‘YES’, or ‘NO’ and press OK. Press the
PAGE Button to return to the page of your choice.
NOTE: If you select ‘Other’ for the Time Zone choice, you must enter the UTC
offset for your location and the Daylight Savings time option is not available.
)
Setup Page
Time Page
The Daylight Savings
time options.
190-00297-02_0A.indd 35 5/19/2003, 4:20:29 PM