Initialization – Garmin GPS 125 Sounder User Manual

Page 11

Advertising
background image

2. Use the

D

key to scroll through the list options until

the country of your present position appears.

3. Use

U

to highlight the country/state/region you’re in.

If the country you’re in is not listed, select another
country within 500 miles of your present position.

4. Press

F

to finish.

The GPS 125 Sounder will now begin searching for

the appropriate satellites for your location and should
acquire a position within a few minutes. You can verify
that you have acquired a position by watching the
Satellite Page transition to the Position Page (provided
you haven’t pressed any other buttons) or by looking for
a ‘2D NAV’ or ‘3D NAV’ status at the top left corner of
the Satellite Page.

Initialization Troubleshooting

If you have trouble initializing the receiver or

acquiring a position, check the following:

• Does the antenna have a clear view of the sky?

If there are nearby buildings, heavy tree cover, a
covered boat slip, etc., the unit may not be receiving
enough satellite signals to calculate a position.

• Have you selected the right country/state/region

from the EZinit list?

Check for the correct approximate lat/long on the
Position Page or reselect the appropriate country
from the list to restart the initialization.

• Have you moved more than 500 miles from the

last calculated position with the receiver off?

Reinitialize the receiver, selecting the country/state/
region of your new location from the EZinit list.

Your unit should now be initialized. If you want to

complete the Getting Started Tour at another time, you
may now turn the GPS 125 Sounder off (see below) or
you may continue.

To turn the GPS 125 Sounder off:

1. Press and hold

P

for approximately three seconds

until the receiver turns off.

7

The GPS 125 Sounder’s
Satellite Page will help you
determine which satellites
are in view and whether or
not any satellites are being
“shaded” or blocked from
the receiver’s antenna.

By monitoring the signal
strength bars at the bottom
of the page and the sky view,
you’ll be able to see how
moving to another area with
a clearer view of the sky will
improve satellite reception
and speed up signal
acquisition.

GETTING

STARTED

Initialization

125 Man Rev B 7/23/98 11:47 AM Page 7

Advertising