Garmin GPS 125 Sounder - Manual (Page 31)

To rename a stored waypoint:
1. Highlight the ‘RENAME?’ field and press
F
.
2. Enter the new waypoint name and press
F
.
3. Press the F key to confirm your changes.
To delete a stored waypoint:
1. Highlight the ‘DELETE?’ field and press
F
.
2. Press the
L
key to select the ‘YES’ prompt.
3. Press
F
to delete the waypoint.
Scanning Waypoints
As you manually enter a waypoint’s name, the GPS
125 Sounder’s waypoint scanning feature will automati-
cally display the first numerical or alphabetical match
of the character you have entered to that point. This
helps eliminate the need to always enter a waypoint’s
complete name.
To scan waypoints from a waypoint field:
1. Highlight the waypoint name field and press
F
.
2. Press the
L
key to clear the name field.
3. Use the
U
and
D
keys to scroll through way-
points.
4. If you have more than one waypoint that begins with
the same letter or number, you must use the
R
key to
move to the next character positions as needed. Only
the first character match is listed for each character
set.
5. Once you’ve found the desired waypoint, press F .
27
A warning page will ask you
for confirmation to delete
the selected waypoint.
Note: If a waypoint is part
of a route, you will need to
remove it from the route
before it can be deleted. (See
pg. 36)
REFERENCE
Editing and
Scanning
Waypoints
Waypoint names will
appear alphabetically
when scanning waypoints.
If two waypoints begin with
the same letter(s) you must
move the cursor to the first
letter they do not have in
common for them to appear.
125 Man Rev B 7/23/98 11:47 AM Page 27