Garmin GPSMAP 168 Sounder - Manual (Page 15)

4
Initializing the Receiver
Getting Started
The GPSMAP 168 Sounder’s advanced keypad system is designed to allow for fast, convenient
selection of navigation options and data entry. The Getting Started Tour will introduce you to the
keypad and provide a “hands-on” lesson in using the GPSMAP 168 Sounder. We strongly encourage
you to take the Getting Started tour before using your unit for actual navigation.
The GPSMAP 168 Sounder Quick Reference Guide contains helpful tips on using the unit and
performing various navigation tasks. It’s a good idea to keep the Quick Reference Guide nearby
whenever you’re operating your new GPSMAP 168 Sounder.
Initializing the Receiver
The fi rst time you power up your new GPSMAP 168 Sounder, the receiver must be given an
opportunity to collect satellite data and establish its present position. To ensure proper initialization, the
GPSMAP 168 Sounder is shipped from the factory in AutoLocate mode, which will allow the receiver
to “fi nd itself” anywhere in the world. To speed up the initialization process, we recommend using
the graphic initialization process described on the next page, which will usually provide a position
fi x within a few minutes.
Before you initialize, make sure the GPSMAP 168 Sounder unit and antenna have been correctly
installed on your vessel according to the instructions in Appendix G. The antenna needs to be in a clear
and unobstructed view of the sky to receive satellite signals.
To turn on the GPSMAP 168 Sounder:
1. Press and hold the POWER key until the power tone sounds and the display comes on, then
release the POWER key.
The Welcome Page will appear while the unit conducts a self-test. Once the internal test is
complete, a warning page will appear, asking you to read and acknowledge important information
regarding the proper use of the unit.
To acknowledge the warning:
1. After reading the warning, press the ENTER/MARK key if you agree.
GPSMAP 168 Sounder Self-Test Screen
GPSMAP 168 Sounder Warning Screen
168 Manual Part 1.indd 4 11/18/2002, 3:36:21 PM