Garmin GPSMAP 168 Sounder - Manual (Page 62)

51
Reference
Editing Waypoints
To access the Waypoint Edit page:
1. Press MENU twice, highlight the ‘Waypt’ tab, and then highlight a waypoint from the ‘By Name’,
‘Nearest’, or ‘Proximity’ waypoint lists. Press ENTER/MARK to display the Waypoint Edit page.
To change the waypoint name:
1. Highlight the waypoint name fi eld and press ENTER/MARK.
2. Use the ARROW KEYPAD to enter a new name and press ENTER/MARK when done.
To change the waypoint symbol:
1. Highlight the waypoint symbol fi eld to the left of the waypoint name and press ENTER/MARK.
2. Use the ARROW KEYPAD to select the desired symbol and press ENTER/MARK when done.
To change the position coordinates:
1. Highlight the position coordinate fi eld and press ENTER/MARK.
2. Use the ARROW KEYPAD to edit the coordinates. To drop to the next line, press to the right on the
ARROW KEYPAD. Press ENTER/MARK when done.
To enter a depth:
1. Highlight the depth fi eld and press ENTER/MARK. If the Sonar was on and active at the time the
waypont was created, a depth will aleady be shown.
2. Use the ARROW KEYPAD to enter a depth. Press UP or DOWN to change the digits and press
RIGHT or LEFT to move the cursor. Press ENTER/MARK when done.
Waypoint Edit Page
168 Manual Part 2.indd 51 11/18/2002, 3:37:49 PM