Step 1: mount the c580 – Garmin StreetPilot c580 User Manual
Page 10
c580 Owner’s Manual
G
ettinG
S
tarted
Step 1: Mount the c580
Select a suitable location to mount the c580 on your windshield. Clean and dry the
selected area of your windshield.
➌
➊
➋
Wndsheld
1. Plug the vehicle power cable into the power connector on the back of the c580.
2. Place the suction cup on the windshield. Flip the lever back, toward the windshield.
3. Snap the socket on the back of the c580 onto the ball on the end of the suction cup
mount.
4. Plug the other end of the vehicle power cable into a power outlet in your vehicle.
The green LED on the vehicle power cable lights when connected to power. Your
unit should turn on automatically if it is plugged in and your vehicle is running.
To remove the c580 from the mount, turn the c580 as far as you can to the right or left.
Apply pressure in that direction until the c580 snaps off the mount.
To remove the suction cup mount from the windshield, flip the lever toward you. Pull
the tab on the suction cup toward you.