Resetting your c580, Changing the fuse – Garmin StreetPilot c580 User Manual
Page 43
c580 Owner’s Manual
5
a
PPendix
Resetting Your c580
If your unit locks up (freezes up), press
and hold the
Power
button to turn off
the unit. Then turn the unit back on. If
this does not help, reset your c580.
1. Place your
thumb nail in
the groove
located
under the
Garmin
logo on the
faceplate.
2. Gently pull off the faceplate.
3. Press the
Reset
button.
4. Connect the c580 to an external
power source. The c580 should
automatically turn back on and
operate normally.
notE: If you need to reset your unit
often, update the system software.
updating the software.
Changing the Fuse
Caution: When replacing the
fuse, do not lose any of the small
pieces and make sure they are put
back in the proper place.
If your unit will not charge in your
vehicle, you may need to replace the
fuse located at the tip of the vehicle
adapter.
1. Unscrew the black
(or silver), round end
piece and remove it.
2. Remove the fuse
(glass and silver
cylinder) and replace
with a 3A fast blow
fuse.
3. Ensure that the silver
tip is placed in the
black end piece.
Screw on the black
end piece.
Reset button
Power button
Faceplate
Reset button
Power button
Faceplate
Unscrew
Unscrew
end
pece
slver tp
fuse
end
pece
slver tp
fuse