Specfications & wiring – Garmin GPS 12CX User Manual

Page 56

Advertising
background image

48

APPENDIX B

Specfications

&

Wiring

Never attempt any repairs yourself. To protect your

GPS 12CX, keep it in a covered container or case when
not in use, and never allow gasoline or other solvents to
come into contact with the case. Clean the case and lens
with a soft cloth and a household window cleaner.

PHYSICAL

Case:

Waterproof*

Size:

5.3 x 14.7 x 3.1 cm

Weight:

Approx 9.5 ounces (269g) w/ batteries

Temperature Range:

5º to 124ºF (-15º to 55ºC)

PERFORMANCE

Receiver:

12 parallel channel, differential-ready

Acquisition Time:

Approx. 15 seconds (warm start)

Approx. 45 seconds (cold start)

Approx. 5 minutes (AutoLocate™)

Update Rate:

1/second, continuous

Position Accuracy:

1-5 meters (3-17 ft.) with DGPS corrections**

15 meters (49 ft.) RMS***

Velocity Accuracy:

0.1 knot RMS steady state

Dynamics:

6g

POWER

Input:

Four 1.5 volt AA batteries or 10-32v DC

Power Consumption:

1 watt

Battery Life:

Up to 36 hours (with 4 AA batteries)

Internal Backup:

lithium battery

NOTE: Alkaline batteries lose a significant amount of their capacity as tem-
perature decreases. If you’re using the GPS 12CX in below freezing tem-
peratures, use lithium batteries for longer battery life. Extensive use of screen
backlighting will significantly reduce battery life.

Specifications subject to change without notice.

* Meets IEC (European Community Specification) 529 IPX7 for protection against

immersion for 30 minutes at a depth of 1 meter.

** With optional DGPS input.

*** Subject to accuracy degradation to 100m 2DRMS under the US DOD-imposed

Selective Availability Program.

Advertising